Average customer rating:
- Great alternative!
- Well made, rock solid mechanism
- Easy to use
- Technically Challenged
- exceeded expectations
|
Bogen-Manfrotto 322RC2 Horizontal Grip Action Ball Head with RC2 Rapid Connect Plate (3157N)
Manufacturer: Bogen
ProductGroup: Photography
Binding: Electronics
Digital Camera
|
Accessories
|
Camera & Photo
|
Categories
|
Electronics
|
Batteries
|
Battery Chargers
|
Docking Stations
|
Lenses
|
Other Digital Camera Accessories
Still Cameras & Camcorders
|
Complete Tripod Units
|
Tripods
|
All Accessories
|
Accessories
|
Camera & Photo
|
Categories
|
Electronics
Ball Heads
|
Tripod Heads
|
Tripods
|
All Accessories
|
Accessories
|
Camera & Photo
|
Categories
|
Electronics
Accessories
|
Tripods
|
All Accessories
|
Accessories
|
Camera & Photo
|
Categories
|
Electronics
|
Camera Mounts & Clamps
|
Camera Stand Accessories
|
Center Columns
|
Monopod Accessories
|
Other Tripod Accessories
|
Tripod Adapters
|
Tripod Head Accessories
|
Tripod Leg Accessories
|
Tripod Straps
Tripods
|
Accessories
|
Used Photo & Camera
|
Specialty Stores
|
Camera & Photo Features
|
Electronics
Bogen
|
Custom Brands
|
Custom Stores
|
Specialty Stores
|
Camera & Photo Features
|
Electronics
|
Camcorder Tripods
|
Camera Tripods
|
Cases and Bags
|
Filters
|
Lights & Meters
Gift-wrap Eligible
|
Specialty Stores
|
Electronics Features
|
Electronics
Tripods
|
Products
|
Similar Items:
-
Bogen Manfrotto 190XPROB 3 Section Aluminum Pro Tripod
-
Manfrotto AW3280BLK - Case for tripod - black
-
Bogen Manfrotto 055XPROB Pro Tripod Legs (Black)
-
Bogen-Manfrotto 055MF3 3-Section MagFiber Tripod without Head
-
Bogen-Manfrotto 055MF4 4-Section Tripod
Accessories:
-
Manfrotto BOGEN 3157N Quick Release Connect Plate RC2
-
Bogen - Manfrotto Rapid Connect Mounting Plate 3/8" replaces 3157A and 3266A QR Plates. For 3030, 3130, 3130G, 3160, 3229, 3265, 3265G, 3262QR, 3299, 2916QR, 3435QR, 3407, 3413QR, 3437 and 3405 Tripod (Spare)
-
Bogen - Manfrotto Electronic Shutter Release Adapter Kit for the 322RC2 Grip Action Ball Head
-
Bogen - Manfrotto Anti Twist Plate 1/4" (same as the 3157N with an additional lip to prevent camera twist)
-
Bogen - Manfrotto 3157ANR Anti Twist Plate 3/8" (same as the 3157AN with an additional lip to prevent camera twist)
Product Features:
- Unblock, move, position and lock your camera with one hand in one position
- Revolutionary grip handle design with ball lock lever
- Friction control wheel regulates power of the blocking mechanism to match the weight of your camera and lens
- Built-in bubble spirit level and quick release camera plate
- Load capacity of 11 pounds; 5.5 pound capacity when in the vertical position
ASIN: B000184N22
Release Date: 2006-04-14
 |
Product Description
Bogen Manfrotto 322RC2 Grip Action Ball Head is unique in that it allows you to unblock, move, position and lock your camera with one hand in one position. This is due to the revolutionary design of its grip handle which incorporates the ball lock lever. A friction control wheel lets you regulate the power of the blocking mechanism to match the weight of your camera and lens. The 322RC2 is made from magnesium for lightweight performance, and is designed to keep the weight of your equipment as close as possible to the tripod's center of gravity by way of its reduced height. It is this fact, matched with the precision construction of the 322RC2 that gives the head its load capacity of 11 lbs (5.5lb capacity when in the vertical position). It comes complete with a built-in bubble spirit level and quick release camera plate (standard 1/4 - 20" screw, with secondary safety pin).
Customer Reviews:
Great alternative!.......2007-12-24
Great alternative to the standard ball head. It's sturdy, it locks and stays locked. Nuff said.
Well made, rock solid mechanism.......2007-12-21
Just got it today. Easily reassembled it for left hand control. This to facilitate keeping the right on the shutter release for action shots. Simple, well made device. I'm in mechanical device manufacturing myself so I appreciate such things. I does what it does very well. Mounting my XTi is a breeze and results in a rock-solid mount on top of the also wonderful Manfrotto 190XPROB tripod I ordered with it.
Why blow upwards of $250 for a tripod and head? This system will make shot composition and framing very, very easy with camera support and positioning made quite transparent to my little photographic process. Just as it should be for this amateur yearning to be better. That's what you're buying here. So if you want a real tool to help get those things out of your way, buy it.
Easy to use.......2007-12-21
The grip design provides the security in preventing the camera from tilting over while the ball head is loosen in adjusting the pitch/roll angle. Provided that the grip tension is adjusted adequately for the weight and size of the camera, the grip and its release mechanism effectively enforces a rigid stance for the camera that rests on top of it. One can only change the angle of the camera when one has a firm grip on the release mechanism. Thus, the camera is in good hands at all time. Once the hand lets go of the grip, the release mechanism tightens up and the camera is firmly in place. So when it comes to an expensive investment of a camera and lens combination, the decision of the type of ball head mount to purchase becomes rather crucial. As compare to the typical ball head design, a slightly loosen in the twist nub may very well be one heartache away from a costly mistake. The design also allows one to rearrange the grip orientation. The left or right grip base arrangement is ideal for heavier equipments as it keeps the center of the gravity of the camera as close to the ball join as possible. Thus, less prone to tilt and cause damage. The horizontal grip arrangement does have draw backs as the full range of motion is hampered by the location of the grip. As for the vertical grip arrangement, it is a universal design and suited for left handed or right handed dominant photographers. However, the full range of motion is once again an issue where one will find it difficult to tilt the camera upwards unless one adjusts the tripod legs to compensate for the angle of desire. In short, if a full range of motion in all directions is NOT an absolute must and you would much prefer the firm grip feel in protecting your camera investment, this ball head design may very well work for you. However, if a full range of motion in all directions is an absolute MUST, perhaps do a bit more research on other options available.
Technically Challenged.......2007-12-16
Like many photographers I have not used a tripod as often as I should because attaching,adjusting,and using everything (the camera/head/tripod) was too time consuming and I always fear damage or mishap. This head eliminates the fear and reluctance to use the tripod because it is so simple and intuitive to use. I know some ball heads cost $350 and more because of their high precision. However,it is difficult for me to imagine better performance, smoother feel, more simple adjustability. I love it and use it often. The ability to attach or remove the camera using the removable mounting plate is very helpful and also provides secure protection against inadvertent unintentional release. The little bubble level included is great for eliminating horizons which tilt up or down. Although I am right-handed, the head adjusts simply for use by lefties. I think shoppers with the same concerns as my self will love it. My advice is "Try it, you'll like it".
exceeded expectations.......2007-12-12
The Bogen-Manfrotto Horizontal Grip Action Ball head is awesome. I changed it to left handed use and it is easy to use and a snap to set up break down with the tripod. Very easy to carry and use.
Product Description
Sakar International Inc. designs, manufactures, and markets digital cameras, binoculars, computer accessories, electronic toys and sport fitness products. It offers consumers a unique blend of high-quality products at affordable prices. In addition, Sakar offers a variety of highly reliable power options that always give you sufficient power.This battery is designed for Canon Powershot S30, Powershot S40 digital cameras and Elura 40MC digital camcorder.
Customer Reviews:
Great!.......2007-12-22
I bought it for Canon G9. It works beyond my expectation. It works as long as Canon's original battery on G9.
5-year warranty and cheap price make this battery the best 2nd battery for Canon G9.
Battery Review.......2007-09-27
It works, it's beyond cheap compared to official models. It does not last as long as the original battery that came with the camera. I would say about 80% as long. I doubt it actually has the storage capacity the manufacturer claims. But I can buy five of them for the price of one of the Japanese made ones. So for my needs it works. But I suggest you should not believe it will last equal to or longer than the one that comes with the camera originally. Expect 80% the capacity for 10% of the price of the OEM battery. (1500 MAH appears bogus to me but I don't have accurate scientific equipment to verify it)
Buy the official Canon version, unless you really really can't afford it.......2007-08-20
I use a Rebel XT and this battery, while 1/3 the price of the Canon NB-2LH, only lasts 1/3 as long. I purchased this thinking I would only use it when the battery that came with my camera was recharging, but I found that in many cases it couldn't even even last through the whole day of shooting on a vacation. I ended up buying a second Canon NB-2LH and now only keep this around as an emergency backup.
spray painted batteries.......2007-08-01
they are spray painted silver over the original dark gray. 8.3V and actually 720mA. i have used them for a month. they tend to last about as along as the original canon battery.
Terrible!.......2007-07-21
I got my first battery when I originally bought my Canon G7 camera in November. It worked for a couple months, and then it simply would not charge. The charger said it was full after 2 minutes, put it in the camera, and it's completely dead. The packaging suggests letting charge a full 10+ hours, even when the charger says it's full, and then next time it will only take 2 hrs to charge. Tried it, let it charge all night, next morning tried it in camera, still dead. Sent it back. Received a replacement battery in February. Worked fine the first couple months, now it's doing the same thing the last one did. I'm done with these batteries. The Canon battery that came with my camera still works great! I'm getting a Canon battery this time.
Product Description
Canon NB-2L replacement Fits S30/S40/S45/S50 Elura 40MC/50MC & similar cameras 800 mAh Li-Ion 5-year warranty
Cheap Consumer Electronics:
- Bogen - Manfrotto 3275 / 410 Compact Geared Head with Quick Release - Supports 11.1 lbs
- Bogen-Manfrotto 484RC2 Mini Ball Head with RC2 Rapid Connect Plate (3157N)
- Bogen-Manfrotto 486RC2 Compact Ball Head with RC2 Rapid Connect System
- Bogen-Manfrotto 685B Neotec Monopod Deluxe with Safety Lock (Black)
- Bogen-Manfrotto 725B Digi Tripod with Integrated Ball Head with Dove Tail Plate and Carrying Bag (Black)
- Bogen - Manfrotto Rapid Connect Mounting Plate for 785SHB Modo Mini Tripod Head & 715 Mini Digi Tripod Head
- Duracell Camcorder Battery for: Fujix H128SW
- Duracell Camcorder Battery for: Fujix P650
- Duracell Camcorder Battery for: Fujix XH-80
- Duracell Camcorder Battery for: JVC GR-AX200
Cheap Consumer Electronics List
Cheap Consumer Electronics
