Average customer rating:
|
B + W 52mm Infrared Filter # 099 (12)
Manufacturer: B + W ProductGroup: CE Binding: Electronics Similar Items:
ASIN: B0000BZL3W ![]() |
Product Description
This orange colored filter blocks the blue and blue-green portion of the visible spectrum up to approximately 520nm. It reduces the excessive sensitivity of color infrared films for this spectral range, helps avoid blue tint and differentiates colors more evenly. Filter factor depends on film sensitivity.Customer Reviews:
Misleading description.......2007-10-17
Average customer rating: |
B + W 52mm Infrared Filter # 093 (87C)
Manufacturer: B + W ProductGroup: Photography Binding: Electronics ASIN: B00017LRRW ![]() |
Product Description
The B+W 093 black infrared filter will filter out the entire visible spectrum. It is used with black and white infrared films with a sensitivity up to 1000nm. Filter factor is determined by the film sensitivity.
Average customer rating: |
B + W 52mm UV/IR Blocking #486 Glass Filter for Blocking Ultra Violet and Infrared Radiation
Manufacturer: B + W ProductGroup: CE Binding: Accessory Product Features:
ASIN: B000A1SVQ4 ![]() |
Product Description
This B+W Interference Filter has a completely colorless glass carrier coated with a number of extremely thin, partially reflecting layers with precisely computed thicknesses, similar to MC coating. The B+W Filter 486 does not block by means of absorption, but by interference of the unwanted UV- and IR radiation that is repeatedly reflected between these layers. It is especially recommended for CCD applications where digital image sensors have not been fitted with an IR protection filter. This filter is completely clear and it requires no increase in exposure. Its filter factor is 1.
Average customer rating: |
B + W 52mm Infrared Filter # 489
Manufacturer: B + W ProductGroup: Photography Binding: Electronics ASIN: B000VQHQVY ![]() |
Product Description
This filter is frequently described as a heat absorbing filter because it lets the visible spectral range pass while the infrared rays from 780nm are strongly blocked. It is often used to protect IR-sensitive CCD sensors or in illumination systems.
Average customer rating: |
B + W 52mm Infrared #092 (RG695) Special Effects Filter for IR Color & Black-&-White Photography
Manufacturer: Schneider ProductGroup: Photography Binding: Electronics ASIN: B000BY5ELU ![]() |
Product Description
B+W 092 dark red filter is for black and white infrared films and filters at light below approximately 650nm. It allows pictures of a pure red image while making good use of the relatively low sensitivity of infrared films. Filter factor is approx. 20-40.
Average customer rating: |
B + W 52mm UV/IR Blocking #486 Wide Angle Slim Mount Glass Filter for Blocking Ultra Violet and Infrared Radiation
Manufacturer: B + W ProductGroup: Photography Binding: Electronics ASIN: B000UUK6XQ ![]() |
Average customer rating: |
B + W 52mm Digital Pro Infrared Filter # 093 (87C/RG830)
Manufacturer: B + W ProductGroup: Photography Binding: Electronics ASIN: B000Z0F44M ![]() |
Product Description
B & W offers three Digital Pro filters for infrared photography, each with its' own unique features. #092. This dark red filter is primarily for black and white infrared films. It filters out light below 650 nm. With color infrared film it produces pictures of a pure red image while making good use of the relatively low sensitivity of infrared films. Filter factor is approx. 20 - 40. #093. This black infrared filter will filter out the entire visible spectrum. It is used with black and white infrared films with a sensitivity up to 1000nm. Filter factor is determined by the film sensitivity. #099. This orange colored filter blocks the blue and blue-green portion of the visible spectrum up to 500 nm. It reduces the excessive sensitivity of color infrared films in this spectral range, separates colors more evenly thereby avoiding a blue tint. Filter factor depends upon the film's sensitivity. The Digital Pro Series filters are designed for users of Digital Cameras and Camcorders. The new chromium-colored mounting goes along perfectly with the light, trendy colors of Digital Cameras. Digital photography gives you advanced capabilities to enhance the picture after it is taken. However one shouldn't forget a very important fact: information which get lost while taking the picture normally even a Computer can't produce afterwards.
Average customer rating: |
B + W 52mm Infrared Filter # 092 (89B/RG695)
Manufacturer: B + W ProductGroup: Photography Binding: Electronics ASIN: B00017LRRC ![]() |
Product Description
B & W offers three filters for infrared photography, each with its' own unique features. #092. This dark red filter is primarily for black and white infrared films. It filters out light below 650 nm. With color infrared film it produces pictures of a pure red image while making good use of the relatively low sensitivity of infrared films. Filter factor is approx. 20 - 40. #093. This black infrared filter will filter out the entire visible spectrum. It is used with black and white infrared films with a sensitivity up to 1000nm. Filter factor is determined by the film sensitivity. #099. This orange colored filter blocks the blue and blue-green portion of the visible spectrum up to 500 nm. It reduces the excessive sensitivity of color infrared films in this spectral range, separates colors more evenly thereby avoiding a blue tint. Filter factor depends upon the film's sensitivity.
Average customer rating: |
B + W 52mm Infrared Black #.093 for Black and White film
Manufacturer: Schneider ProductGroup: Photography Binding: Electronics ASIN: B000FEDZ4Y ![]() |
Average customer rating: |
B + W 52mm Digital Pro UV/IR Blocking #486 Glass Filter for Blocking Ultra Violet and Infrared Radiation
Manufacturer: B + W ProductGroup: Photography Binding: Electronics Product Features:
ASIN: B000J3L1PQ ![]() |
Product Description
This B+W Interference Filter has a completely colorless glass carrier coated with a number of extremely thin, partially reflecting layers with precisely computed thicknesses, similar to MC coating. The B+W Filter 486 does not block by means of absorption, but by interference of the unwanted UV- and IR radiation that is repeatedly reflected between these layers. It is especially recommended for CCD applications where digital image sensors have not been fitted with an IR protection filter. This filter is completely clear and it requires no increase in exposure. Its filter factor is 1. The Digital Pro Series filters are designed for users of Digital Cameras and Camcorders. The new chromium-colored mounting goes along perfectly with the light, trendy colors of Digital Cameras. Digital photography gives you advanced capabilities to enhance the picture after it is taken. However one shouldn't forget a very important fact: information which get lost while taking the picture normally even a Computer can't produce afterwards.Cheap Consumer Electronics: